What is the syntax to inherit from a class in C#?
Place a colon and then the name of the base class.
Example: class MyNewClass : MyBaseClass
Can you prevent your class from being inherited by another class?
Yes. The keyword “sealed” will prevent the class from being inherited.
Can you allow a class to be inherited, but prevent the method from being over-ridden?
Yes. Just leave the class public and make the method sealed.
What’s an abstract class?
A class that cannot be instantiated. An abstract class is a class that must be inherited and have the methods overridden. An abstract class is essentially a blueprint for a class without any implementation.
When do you absolutely have to declare a class as abstract?
1. When the class itself is inherited from an abstract class, but not all base abstract methods have been overridden.
2. When at least one of the methods in the class is abstract.
What is an interface class?
Interfaces, like classes, define a set of properties, methods, and events. But unlike classes, interfaces do not provide implementation. They are implemented by classes, and defined as separate entities from classes.
Why can’t you specify the accessibility modifier for methods inside the interface?
They all must be public, and are therefore public by default.
What happens if you inherit multiple interfaces and they have conflicting method names?
It’s up to you to implement the method inside your own class, so implementation is left entirely up to you. This might cause a problem on a higher-level scale if similarly named methods from different interfaces expect different data, but as far as compiler cares you’re okay.
To Do: Investigate
What’s the difference between an interface and abstract class?
In an interface class, all methods are abstract - there is no implementation. In an abstract class some methods can be concrete. In an interface class, no accessibility modifiers are allowed. An abstract class may have accessibility modifiers.
What is the difference between a Struct and a Class?
Struts are value-type variables and are thus saved on the stack, additional overhead but faster retrieval. Another difference is that struts cannot inherit.
What’s the implicit name of the parameter that gets passed into the set method/property of a class?
Value. The data type of the value parameter is defined by whatever data type the property is declared as.
What does the keyword “virtual” declare for a method or property?
The method or property can be overridden.
How is method overriding different from method overloading?
When overriding a method, you change the behavior of the method for the derived class. Overloading a method simply involves having another method with the same name within the class.
Can you declare an override method to be static if the original method is not static?
No. The signature of the virtual method must remain the same. (Note: Only the keyword virtual is changed to keyword override)
What are the different ways a method can be overloaded?
Different parameter data types, different number of parameters, different order of parameters.
If a base class has a number of overloaded constructors, and an inheriting class has a number of overloaded constructors; can you enforce a call from an inherited constructor to a specific base constructor?
Yes, just place a colon, and then keyword base (parameter list to invoke the appropriate constructor) in the overloaded constructor definition inside the inherited class.
What’s a delegate?
A delegate object encapsulates a reference to a method.
What’s a multicast delegate?
A delegate that has multiple handlers assigned to it. Each assigned handler (method) is called.
Why are there five tracing levels in System.Diagnostics.TraceSwitcher?
The tracing dumps can be quite verbose. For applications that are constantly running you run the risk of overloading the machine and the hard drive. Five levels range from None to Verbose, allowing you to fine-tune the tracing activities.
Where is the output of TextWriterTraceListener redirected?
To the Console or a text file depending on the parameter passed to the constructor.
How do you debug an ASP.NET Web application?
Attach the aspnet_wp.exe process to the DbgClr debugger.
What are three test cases you should go through in unit testing?
1. Positive test cases (correct data, correct output).
2. Negative test cases (broken or missing data, proper handling).
3. Exception test cases (exceptions are thrown and caught properly).
Can you change the value of a variable while debugging a C# application?
Yes. If you are debugging via Visual Studio.NET, just go to Immediate window.
What is the role of the DataReader class in ADO.NET connections?
It returns a read-only, forward-only rowset from the data source. A DataReader provides fast access when a forward-only sequential read is needed.What are advantages and disadvantages of Microsoft-provided data provider classes in ADO.NET?
SQLServer.NET data provider is high-speed and robust, but requires SQL Server license purchased from Microsoft. OLE-DB.NET is universal for accessing other sources, like Oracle, DB2, Microsoft Access and Informix. OLE-DB.NET is a .NET layer on top of the OLE layer, so it’s not as fastest and efficient as SqlServer.NET.
What is the wildcard character in SQL?
Let’s say you want to query database with LIKE for all employees whose name starts with La. The wildcard character is %, the proper query with LIKE would involve ‘La%’.
Explain ACID rule of thumb for transactions.
A transaction must be:
1. Atomic - it is one unit of work and does not dependent on previous and following transactions.
2. Consistent - data is either committed or roll back, no “in-between” case where something has been updated and something hasn’t.
3. Isolated - no transaction sees the intermediate results of the current transaction).
4. Durable - the values persist if the data had been committed even if the system crashes right after.
What connections does Microsoft SQL Server support?
Windows Authentication (via Active Directory) and SQL Server authentication (via Microsoft SQL Server username and password).
Between Windows Authentication and SQL Server Authentication, which one is trusted and which one is untrusted?
Windows Authentication is trusted because the username and password are checked with the Active Directory, the SQL Server authentication is untrusted, since SQL Server is the only verifier participating in the transaction.
What does the Initial Catalog parameter define in the connection string?
The database name to connect to.
What does the Dispose method do with the connection object?
Deletes it from the memory.
What is a pre-requisite for connection pooling?
Multiple processes must agree that they will share the same connection, where every parameter is the same, including the security settings. The connection string must be identical.
How is the DLL Hell problem solved in .NET?
Assembly versioning allows the application to specify not only the library it needs to run (which was available under Win32), but also the version of the assembly.
What are the ways to deploy an assembly?
An MSI installer, a CAB archive, and XCOPY command.
What is a satellite assembly?
When you write a multilingual or multi-cultural application in .NET, and want to distribute the core application separately from the localized modules, the localized assemblies that modify the core application are called satellite assemblies.
What namespaces are necessary to create a localized application?
System.Globalization and System.Resources.
What is the smallest unit of execution in .NET?
an Assembly.
When should you call the garbage collector in .NET?
As a good rule, you should not call the garbage collector. However, you could call the garbage collector when you are done using a large object (or set of objects) to force the garbage collector to dispose of those very large objects from memory. However, this is usually not a good practice.
How do you convert a value-type to a reference-type?
Use Boxing.
What happens in memory when you Box and Unbox a value-type?
Boxing converts a value-type to a reference-type, thus storing the object on the heap. Unboxing converts a reference-type to a value-type, thus storing the value on the stack.Difference between directcast and ctype.
Answer1
DirectCast requires the run-time type of an object variable to bethe same as the specified type.The run-time performance ofDirectCast is better than that of CType, if the specified type and the run-time typeof the expression are the same. Ctype works fine if there is a valid conversion defined between the expression and the type.
Answer2
The difference between the two keywords is that CType succeeds as long as there is a valid conversion defined between the expression and the type, whereas DirectCast requires the run-time type of an object variable to be the same as the specified type. If the specified type and the run-time type of the expression are the same, however, the run-time performance of DirectCast is better than that of CType.
An example of a ctype and directcast.
In the preceding example, the run-time type of Q is Double. CType succeeds because Double can be converted to Integer, but DirectCast fails because the run-time type of Q is not already Integer
ctype(123.34,integer) - should it throw an error? Why or why not?
Answer1
It would work fine. As the runtime type of 123.34 would be double, and Double can be converted to Integer.
Answer2
the ctype(123.34,integer) will work fine no errors
directcast(123.34,integer) - should it throw an error? Why or why not?
It would throw an InvalidCast exception as the runtime type of 123.34 (double) doesnt match with Integer.
Difference between a sub and a function.
Answer1
A Sub does not return anything whereas a Function returns something.
Answer2
-A Sub Procedure is a method will not return a value
-A sub procedure will be defined with a “Sub” keyword
Sub ShowName(ByVal myName As String)
Console.WriteLine(”My name is: ” & myName)
End Sub
-A function is a method that will return value(s).
-A function will be defined with a “Function” keyword
Function FindSum(ByVal num1 As Integer, ByVal num2 As Integer) As Integer
Dim sum As Integer = num1 + num2
Return sum
End Function
Explain manifest & metadata.
Answer1
Manifest is metadata about assemblies. Metadata is machine-readable information about a resource, or “”data about data.” In .NET, metadata includes type definitions, version information, external assembly references, and other standardized information.
Answer2
Manifest: Manifest describes assembly itself. Assembly Name, version number, culture, strong name, list of all files, Type references, and referenced assemblies.
Metadata: Metadata describes contents in an assembly classes, interfaces, enums, structs, etc., and their containing namespaces, the name of each type, its visibility/scope, its base class, the nterfaces it implemented, its methods and their scope, and each method’s parameters, type’s properties, and so on.
Difference between imperative and interrogative code.
There are imperative and interrogative functions. Imperative functions are the one which return a value while the interrogative functions do not return a value.
Difference between value and reference type. what are value types and reference types?
Value type - bool, byte, chat, decimal, double, enum , float, int, long, sbyte, short, strut, uint, ulong, ushort
Value types are stored in the Stack
Reference type - class, delegate, interface, object, string
Reference types are stored in the Heap
What are the two kinds of properties.
Two types of properties in .Net: Get and Set
Explain constructor.
Constructor is a method in the class which has the same name as the class (in VB.Net its New()). It initializes the member attributes whenever an instance of the class is created.
Describe ways of cleaning up objects.
Answer1
There is a perfect tool provide by .net frameworks calls Garbage collector, where by mean of GC we can clean up the object and reclaim the memory. The namespace used is System.GC
Answer2
the run time will maintain a service called as garbage collector. This service will take care of deallocating memory corresponding to objects. it works as a thread with least priority. when application demands for memory the runtime will take care of setting the high priority for the garbage collector, so that it will be called for execution and memory will be released. the programmer can make a call to garbage collector by using GC class in system name space.
How can you clean up objects holding resources from within the code?
Call the dispose method from code for clean up of objects
Which controls do not have events?
Timer control.
What is the maximum size of the textbox?
65536.
Which property of the textbox cannot be changed at runtime?
Locked Property.
Which control cannot be placed in MDI?
The controls that do not have events.
What is the difference between proc. sent BY VAL and BY SUB?
BY VAL: changes will not be reflected back to the variable.
By REF: changes will be reflected back to that variable.( same as & symbol in c, c++)
No.
Who is a protected class-level variable available to?
It is available to any sub-class (a class inheriting this class).
Are private class-level variables inherited?
Yes, but they are not accessible. Although they are not visible or accessible via the class interface, they are inherited.
Describe the accessibility modifier “protected internal”.
It is available to classes that are within the same assembly and derived from the specified base class.
What’s the top .NET class that everything is derived from?
System.Object.
What does the term immutable mean?
The data value may not be changed. Note: The variable value may be changed, but the original immutable data value was discarded and a new data value was created in memory.
What’s the difference between System.String and System.Text.StringBuilder classes?
System.String is immutable. System.StringBuilder was designed with the purpose of having a mutable string where a variety of operations can be performed.
What’s the advantage of using System.Text.StringBuilder over System.String?
StringBuilder is more efficient in cases where there is a large amount of string manipulation. Strings are immutable, so each time a string is changed, a new instance in memory is created.
Can you store multiple data types in System.Array?
No.
What’s the difference between the System.Array.CopyTo() and System.Array.Clone()?
The Clone() method returns a new array (a shallow copy) object containing all the elements in the original array. The CopyTo() method copies the elements into another existing array. Both perform a shallow copy. A shallow copy means the contents (each array element) contains references to the same object as the elements in the original array. A deep copy (which neither of these methods performs) would create a new instance of each element's object, resulting in a different, yet identical object.
How can you sort the elements of the array in descending order?
By calling Sort() and then Reverse() methods.
Place a colon and then the name of the base class.
Example: class MyNewClass : MyBaseClass
Can you prevent your class from being inherited by another class?
Yes. The keyword “sealed” will prevent the class from being inherited.
Can you allow a class to be inherited, but prevent the method from being over-ridden?
Yes. Just leave the class public and make the method sealed.
What’s an abstract class?
A class that cannot be instantiated. An abstract class is a class that must be inherited and have the methods overridden. An abstract class is essentially a blueprint for a class without any implementation.
When do you absolutely have to declare a class as abstract?
1. When the class itself is inherited from an abstract class, but not all base abstract methods have been overridden.
2. When at least one of the methods in the class is abstract.
What is an interface class?
Interfaces, like classes, define a set of properties, methods, and events. But unlike classes, interfaces do not provide implementation. They are implemented by classes, and defined as separate entities from classes.
Why can’t you specify the accessibility modifier for methods inside the interface?
They all must be public, and are therefore public by default.
What happens if you inherit multiple interfaces and they have conflicting method names?
It’s up to you to implement the method inside your own class, so implementation is left entirely up to you. This might cause a problem on a higher-level scale if similarly named methods from different interfaces expect different data, but as far as compiler cares you’re okay.
To Do: Investigate
What’s the difference between an interface and abstract class?
In an interface class, all methods are abstract - there is no implementation. In an abstract class some methods can be concrete. In an interface class, no accessibility modifiers are allowed. An abstract class may have accessibility modifiers.
What is the difference between a Struct and a Class?
Struts are value-type variables and are thus saved on the stack, additional overhead but faster retrieval. Another difference is that struts cannot inherit.
What’s the implicit name of the parameter that gets passed into the set method/property of a class?
Value. The data type of the value parameter is defined by whatever data type the property is declared as.
What does the keyword “virtual” declare for a method or property?
The method or property can be overridden.
How is method overriding different from method overloading?
When overriding a method, you change the behavior of the method for the derived class. Overloading a method simply involves having another method with the same name within the class.
Can you declare an override method to be static if the original method is not static?
No. The signature of the virtual method must remain the same. (Note: Only the keyword virtual is changed to keyword override)
What are the different ways a method can be overloaded?
Different parameter data types, different number of parameters, different order of parameters.
If a base class has a number of overloaded constructors, and an inheriting class has a number of overloaded constructors; can you enforce a call from an inherited constructor to a specific base constructor?
Yes, just place a colon, and then keyword base (parameter list to invoke the appropriate constructor) in the overloaded constructor definition inside the inherited class.
What’s a delegate?
A delegate object encapsulates a reference to a method.
What’s a multicast delegate?
A delegate that has multiple handlers assigned to it. Each assigned handler (method) is called.
Why are there five tracing levels in System.Diagnostics.TraceSwitcher?
The tracing dumps can be quite verbose. For applications that are constantly running you run the risk of overloading the machine and the hard drive. Five levels range from None to Verbose, allowing you to fine-tune the tracing activities.
Where is the output of TextWriterTraceListener redirected?
To the Console or a text file depending on the parameter passed to the constructor.
How do you debug an ASP.NET Web application?
Attach the aspnet_wp.exe process to the DbgClr debugger.
What are three test cases you should go through in unit testing?
1. Positive test cases (correct data, correct output).
2. Negative test cases (broken or missing data, proper handling).
3. Exception test cases (exceptions are thrown and caught properly).
Can you change the value of a variable while debugging a C# application?
Yes. If you are debugging via Visual Studio.NET, just go to Immediate window.
What is the role of the DataReader class in ADO.NET connections?
It returns a read-only, forward-only rowset from the data source. A DataReader provides fast access when a forward-only sequential read is needed.What are advantages and disadvantages of Microsoft-provided data provider classes in ADO.NET?
SQLServer.NET data provider is high-speed and robust, but requires SQL Server license purchased from Microsoft. OLE-DB.NET is universal for accessing other sources, like Oracle, DB2, Microsoft Access and Informix. OLE-DB.NET is a .NET layer on top of the OLE layer, so it’s not as fastest and efficient as SqlServer.NET.
What is the wildcard character in SQL?
Let’s say you want to query database with LIKE for all employees whose name starts with La. The wildcard character is %, the proper query with LIKE would involve ‘La%’.
Explain ACID rule of thumb for transactions.
A transaction must be:
1. Atomic - it is one unit of work and does not dependent on previous and following transactions.
2. Consistent - data is either committed or roll back, no “in-between” case where something has been updated and something hasn’t.
3. Isolated - no transaction sees the intermediate results of the current transaction).
4. Durable - the values persist if the data had been committed even if the system crashes right after.
What connections does Microsoft SQL Server support?
Windows Authentication (via Active Directory) and SQL Server authentication (via Microsoft SQL Server username and password).
Between Windows Authentication and SQL Server Authentication, which one is trusted and which one is untrusted?
Windows Authentication is trusted because the username and password are checked with the Active Directory, the SQL Server authentication is untrusted, since SQL Server is the only verifier participating in the transaction.
What does the Initial Catalog parameter define in the connection string?
The database name to connect to.
What does the Dispose method do with the connection object?
Deletes it from the memory.
What is a pre-requisite for connection pooling?
Multiple processes must agree that they will share the same connection, where every parameter is the same, including the security settings. The connection string must be identical.
How is the DLL Hell problem solved in .NET?
Assembly versioning allows the application to specify not only the library it needs to run (which was available under Win32), but also the version of the assembly.
What are the ways to deploy an assembly?
An MSI installer, a CAB archive, and XCOPY command.
What is a satellite assembly?
When you write a multilingual or multi-cultural application in .NET, and want to distribute the core application separately from the localized modules, the localized assemblies that modify the core application are called satellite assemblies.
What namespaces are necessary to create a localized application?
System.Globalization and System.Resources.
What is the smallest unit of execution in .NET?
an Assembly.
When should you call the garbage collector in .NET?
As a good rule, you should not call the garbage collector. However, you could call the garbage collector when you are done using a large object (or set of objects) to force the garbage collector to dispose of those very large objects from memory. However, this is usually not a good practice.
How do you convert a value-type to a reference-type?
Use Boxing.
What happens in memory when you Box and Unbox a value-type?
Boxing converts a value-type to a reference-type, thus storing the object on the heap. Unboxing converts a reference-type to a value-type, thus storing the value on the stack.Difference between directcast and ctype.
Answer1
DirectCast requires the run-time type of an object variable to bethe same as the specified type.The run-time performance ofDirectCast is better than that of CType, if the specified type and the run-time typeof the expression are the same. Ctype works fine if there is a valid conversion defined between the expression and the type.
Answer2
The difference between the two keywords is that CType succeeds as long as there is a valid conversion defined between the expression and the type, whereas DirectCast requires the run-time type of an object variable to be the same as the specified type. If the specified type and the run-time type of the expression are the same, however, the run-time performance of DirectCast is better than that of CType.
An example of a ctype and directcast.
In the preceding example, the run-time type of Q is Double. CType succeeds because Double can be converted to Integer, but DirectCast fails because the run-time type of Q is not already Integer
ctype(123.34,integer) - should it throw an error? Why or why not?
Answer1
It would work fine. As the runtime type of 123.34 would be double, and Double can be converted to Integer.
Answer2
the ctype(123.34,integer) will work fine no errors
directcast(123.34,integer) - should it throw an error? Why or why not?
It would throw an InvalidCast exception as the runtime type of 123.34 (double) doesnt match with Integer.
Difference between a sub and a function.
Answer1
A Sub does not return anything whereas a Function returns something.
Answer2
-A Sub Procedure is a method will not return a value
-A sub procedure will be defined with a “Sub” keyword
Sub ShowName(ByVal myName As String)
Console.WriteLine(”My name is: ” & myName)
End Sub
-A function is a method that will return value(s).
-A function will be defined with a “Function” keyword
Function FindSum(ByVal num1 As Integer, ByVal num2 As Integer) As Integer
Dim sum As Integer = num1 + num2
Return sum
End Function
Explain manifest & metadata.
Answer1
Manifest is metadata about assemblies. Metadata is machine-readable information about a resource, or “”data about data.” In .NET, metadata includes type definitions, version information, external assembly references, and other standardized information.
Answer2
Manifest: Manifest describes assembly itself. Assembly Name, version number, culture, strong name, list of all files, Type references, and referenced assemblies.
Metadata: Metadata describes contents in an assembly classes, interfaces, enums, structs, etc., and their containing namespaces, the name of each type, its visibility/scope, its base class, the nterfaces it implemented, its methods and their scope, and each method’s parameters, type’s properties, and so on.
Difference between imperative and interrogative code.
There are imperative and interrogative functions. Imperative functions are the one which return a value while the interrogative functions do not return a value.
Difference between value and reference type. what are value types and reference types?
Value type - bool, byte, chat, decimal, double, enum , float, int, long, sbyte, short, strut, uint, ulong, ushort
Value types are stored in the Stack
Reference type - class, delegate, interface, object, string
Reference types are stored in the Heap
What are the two kinds of properties.
Two types of properties in .Net: Get and Set
Explain constructor.
Constructor is a method in the class which has the same name as the class (in VB.Net its New()). It initializes the member attributes whenever an instance of the class is created.
Describe ways of cleaning up objects.
Answer1
There is a perfect tool provide by .net frameworks calls Garbage collector, where by mean of GC we can clean up the object and reclaim the memory. The namespace used is System.GC
Answer2
the run time will maintain a service called as garbage collector. This service will take care of deallocating memory corresponding to objects. it works as a thread with least priority. when application demands for memory the runtime will take care of setting the high priority for the garbage collector, so that it will be called for execution and memory will be released. the programmer can make a call to garbage collector by using GC class in system name space.
How can you clean up objects holding resources from within the code?
Call the dispose method from code for clean up of objects
Which controls do not have events?
Timer control.
What is the maximum size of the textbox?
65536.
Which property of the textbox cannot be changed at runtime?
Locked Property.
Which control cannot be placed in MDI?
The controls that do not have events.
What is the difference between proc. sent BY VAL and BY SUB?
BY VAL: changes will not be reflected back to the variable.
By REF: changes will be reflected back to that variable.( same as & symbol in c, c++)
General C# Interview Questions :
Does C# support multiple-inheritance?
No.
Who is a protected class-level variable available to?
It is available to any sub-class (a class inheriting this class).
Are private class-level variables inherited?
Yes, but they are not accessible. Although they are not visible or accessible via the class interface, they are inherited.
Describe the accessibility modifier “protected internal”.
It is available to classes that are within the same assembly and derived from the specified base class.
What’s the top .NET class that everything is derived from?
System.Object.
What does the term immutable mean?
The data value may not be changed. Note: The variable value may be changed, but the original immutable data value was discarded and a new data value was created in memory.
What’s the difference between System.String and System.Text.StringBuilder classes?
System.String is immutable. System.StringBuilder was designed with the purpose of having a mutable string where a variety of operations can be performed.
What’s the advantage of using System.Text.StringBuilder over System.String?
StringBuilder is more efficient in cases where there is a large amount of string manipulation. Strings are immutable, so each time a string is changed, a new instance in memory is created.
Can you store multiple data types in System.Array?
No.
What’s the difference between the System.Array.CopyTo() and System.Array.Clone()?
The Clone() method returns a new array (a shallow copy) object containing all the elements in the original array. The CopyTo() method copies the elements into another existing array. Both perform a shallow copy. A shallow copy means the contents (each array element) contains references to the same object as the elements in the original array. A deep copy (which neither of these methods performs) would create a new instance of each element's object, resulting in a different, yet identical object.
How can you sort the elements of the array in descending order?
By calling Sort() and then Reverse() methods.